Have a question? Call us at 800-535-1302

  Home > Hose & Tubing > Hydraulic Hoses > SAE 100R4 Suction and Return Hose >

3/4" SAE 100R4 Suction Hose Assembly
<!R4-12-ASB>3/4" SAE 100R4 Suction Hose Assembly


 
This made-to-order hose assembly is available with standard crimp Braided Hose Fittings. Select your required fittings and length below. Click Update Price to view your total cost with the selected options.
When measuring your custom hose assembly, measure fitting to fitting on straight assemblies, and to the center line of a 90 or 45 fitting.
Cost per foot: $5.28
Assembly fee: $10.00


Product Code: R4-12-ASB

Hose Fittings

Fitting 1*:


Fitting 2*:

** If selecting an angled fitting for both Fitting 1 and Fitting 2, such as a 90 and a 45, please see our Hose Orientation information under the Extended Information tab below.
Overall length (feet+inches, includes fittings)

Feet*:


Inches*:


Orientation:

Would you like hose protection?

Choose a hose protection option:


Would you like to add hose protect?:


Addon Charge:

Would you like a permanent hose label attached?

Hose Labeling*:
Yes. [Add $0.50]Please see this photo for an example of the included hose label.
No.
Please contact me about custom label options.

Qty:
Description Technical Specifications Extended Information
 

R4 hose is recommended for petroleum and water-bases hydraulic fluids in low pressure and vacuum service. R4 Suction Hose features a Helix wire between the braids resists collapse under vacuum or bending. This hose is suitable for hydraulic fluids on miner3/4" SAE 100R4 Suction and Return Hose is recommended for low pressure or vacuum lines in hydraulic system service with petroleum and water-base fluids.

Interchanges with Aeroquip FC318-12, Gates 12G4, Parker 881-12, and Weatherhead H03912

Use this product with the following hose fittings:

Braided Hose Fittings

Standard crimp
Interchanges with
Weatherhead U Series


W Series Hose Fittings

Bite-to-the-wire peformance
al oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

Not suitable for hydraulic fluids on phosphate ester basis (HFD).

Use this hose with:

Steel Multibarb Hose Ends

- or -

Beaded Hose Barbs


Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
Hydraulic suction hose April 12, 2018
Reviewer: Merwyn Breneman from Pardeeville, WI United States  
Your charts had enough information to figure out the correct part # to order. Parts are good price and correct fit.****

Was this review helpful to you?


Browse for more products in the same category as this item:

Hose & Tubing > Hydraulic Hoses > SAE 100R4 Suction and Return Hose
Hose & Tubing > Made-to-Order Hose Assemblies > 3/4" inside diameter

Join Our Mailing List

Sign Up to receive exclusive offers and product announcements

Free Ground Shipping
with $4500 Purchase

Some limits apply