View CartMy Account / Order StatusHelp
 
Help Desk Software




ABOUT SSL CERTIFICATES
(Your shopping cart is empty)

  Home > Bulk Hose and Tubing > Hydraulic Hose >

  4SH Four-Wire Hydraulic Hose
EN 856 4SH Four-Wire Hydraulic Hose
Four spiral layers of high tensile steel wire reinforcement


 
Interchanges with: Use with the following fittings:
Aeroquip GH506
Parker 731
Weatherhead H464
EN 856 4SH
DIN 20 023-4SH

W Series
Bite-To-The-Wire
Crimp Fittings

Up to size -24 only

JJ Series
Skive
Crimp Fittings
Sizes -20, -24 and -32 only
Four-wire spiral hose. Ideally suited for high-impulse applications. Handles higher pressures than SAE 100R12. No skiving required with W-Series hose fittings (up to size -24 only). Recommended for petroleum and water-based hydraulic fluids in very high pressure applications. Meets or exceeds all EN 856 4SH and DIN 20 023-4SH specifications (below price table).

Item# Item Name Catalog
Price
Web
Price
Qty Add
4SH-12 4SH-12 | 3/4" EN 856 4SH Hydraulic Hose (by the foot)
$10.45
$9.82
4SH-12-COIL 4SH-12-COIL | 131 feet of 3/4" EN 856 4SH Hydraulic Hose
$1,306.07
$1,227.71
4SH-16 4SH-16 | 1" EN 856 4SH Hydraulic Hose (by the foot)
$17.71
$16.65
4SH-16-COIL 4SH-16-COIL | 131 feet of 1" EN 856 4SH Hydraulic Hose
$2,209.97
$2,077.37
4SH-20 4SH-20 | 1-1/4" EN 856 4SH Hydraulic Hose (by the foot)
$18.41
$17.31
4SH-20-COIL 4SH-20-COIL | 131 feet of 1-1/4" EN 856 4SH Hydraulic Hose
$2,296.43
$2,158.64
4SH-24 4SH-24 | 1-1/2" EN 856 4SH Hydraulic Hose (by the foot)
$24.14
$22.69
4SH-24-COIL 4SH-24-COIL | 131 feet of 1-1/2" EN 856 4SH Hydraulic Hose
$3,009.07
$2,828.53
4SH-32 4SH-32 | 2" EN 856 4SH Hydraulic Hose (by the foot)
$30.41
$28.59
4SH-32-COIL 4SH-32-COIL | 131 feet of 2" EN 856 4SH Hydraulic Hose
$3,796.38
$3,568.60
Check the items you wish to purchase, then click


Technical Specifications:

EN 856 4SH / DIN 20 023-4SH Four-Wire Hydraulic Hose

  • Black, oil-resistant Nittrile (BTR) tube
  • Four spiral layers of high tensile steel wire reinforcement
  • Oil and abrasion resistant, black Neoprene (CR) cover for long wear
  • Temperature range: -40 to +212 F (max. 248 F intermittent)
Hydraulax
Item Number
Inside
Diameter
Outside
Diameter
Maximum Working
Pressure (PSI)
Minimum Burst
Pressure (PSI)
Minimum Bend
Radius
4SH-12 3/4" 1.21" 6,095 24,380 9.5"
4SH-16 1" 1.50" 5,515 22,060 12"
4SH-20 1-1/4" 1.85" 5,000 20,000 16.5"
4SH-24 1-1/2" 2.11" 4,200 16,800 20"
4SH-32 2" 2.63" 3,625 14,500 25"

This hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

Not suitable for hydraulic fluids on phosphate ester basis (HFD).




Accessories/Related Products
JIC Female Swivel 45 JIC Female Swivel JIC Female Swivel 90 JIC Male Rigid
NPTF Male Pipe Rigid


Browse for more products in the same category as this item:

Bulk Hose and Tubing > Hydraulic Hose
DiscountHydraulicHose.com
5606 Tulip Street
PO Box 9580
Philadelphia, PA 19124
 Contact Us
 Product Literature
 Thread Sizes
 Pressure Ratings
 Mailing List
 Trade Shows
 Help