Gray Push-Lock Low Pressure HoseRecommended for low pressure air, fuel, oil and water lines. No clamps or ferrules needed when used with Push-Lock Hose Barbs
- Black, oil resistant Nittrile (BTR) tube.
- Braided textile reinforcement.
- Oil and abrasion resistant Neoprene (CR) cover available in five colors.
- Temperature range: -40° to +212° F
- Water not to exceed 150° F
- Air not to exceed 160° F
Push-Lock Hose Specifications
Item# |
Inner Diameter |
Outer Diameter |
Maximum Working Pressure (psi) |
Minimum Burst Pressure (psi) |
Minimum Bend Radius |
3386-04 |
1/4" |
.50" |
250 |
1,000 |
3" |
3386-06 |
3/8" |
.62" |
250 |
1,000 |
3" |
3386-08 |
1/2" |
.75" |
250 |
1,000 |
5" |
3386-10 |
5/8" |
.91" |
250 |
1,000 |
6" |
3386-12 |
3/4" |
1.03" |
250 |
1,000 |
7" |
This hose is suitable for hydraulic fluids on mineral oil
and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS,
HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants,
cooling water, and compressed air. Also generally suitable for biologically
degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.
Not suitable for hydraulic fluids on phosphate ester basis
(HFD).
|
