Hydraulic Jack HoseRecommended for high pressure hydraulic jack oil lines.
- Black, oil resistant Nittrile (BTR) tube.
- Two braids of high tensile steel wire reinforcement.
- Oil and abrasion resistant, black Neoprene (CR) cover.
- Temperature range: -40° to +212° Fahrenheit.
- No skiving required.
HJK Hose Specifications
Item# |
Inner Diameter |
Outer Diameter |
Maximum Working Pressure (psi) |
Minimum Burst Pressure (psi) |
Minimum Bend Radius |
Reel Length* |
HJK-04 |
1/4" |
0.59" |
10,000 |
20,000 |
4" |
700' |
HJK-06 |
3/8" |
0.75" |
10,000 |
20,000 |
7" |
450' |
* Reel may not contain one continuous length of hose.
This hose is suitable for hydraulic fluids on mineral oil
and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS,
HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants,
cooling water, and compressed air. Also generally suitable for biologically
degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.
Not suitable for hydraulic fluids on phosphate ester basis
(HFD).
|