Very High Pressure Hydraulic Hose (4-wire)Recommended for petroleum and water-bases hydraulic fluids in very high pressure applications. Meets or exceeds all requirements of SAE 100R12.
- Long-lasting cover is well-suited for mobile hydraulics.
- Black, oil resistant, synthetic rubber tube.
- Four spiral layers of high tensile steel wire reinforcement.
- Oil and abrasion resistant, gray synthetic rubber cover.
- Temperature range: -40° to +250° Fahrenheit.
- No skiving required.
SAE 100R12 HoseSpecifications
Item# |
Inner Diameter |
Outer Diameter |
Maximum Working Pressure (psi) |
Minimum Burst Pressure (psi) |
Minimum Bend Radius |
Coil Length |
R12-06 |
3/8" |
0.80" |
4,000 |
16,000 |
5" |
131' |
R12-08 |
1/2" |
0.94" |
4,000 |
16,000 |
7" |
131' |
R12-12 |
3/4" |
1.21" |
4,000 |
16,000 |
9.5" |
131' |
R12-16 |
1" |
1.50" |
4,000 |
16,000 |
12" |
131' |
R12-20 |
1-1/4" |
1.85" |
3,000 |
12,000 |
16.5" |
131' |
R12-24 |
1-1/2" |
2.11" |
2,500 |
10,000 |
20" |
131' |
R12-32 |
2" |
2.63" |
2,500 |
10,000 |
25" |
131' |
This hose is suitable for hydraulic fluids on mineral oil
and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS,
HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants,
cooling water, and compressed air. Also generally suitable for biologically
degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.
Not suitable for hydraulic fluids on phosphate ester basis
(HFD).
|
