Medium Pressure Hydraulic Hose"R3" is a fiber reinforced hydraulic hose for applications where steel wire is not desired. Recommended for medium pressure fuel and oil lines, as well as hydraulic return and suction lines. Meets or exceeds all requirements of SAE 100R3.
- Black, oil resistant Nittrile (BTR) tube.
- Two layers of braided fiber reinforcement.
- Oil and abrasion resistant, black Neoprene (CR) cover.
- Temperature range: -40° to +212° Fahrenheit.
- No skiving required.
SAE 100R3 Hose Specifications
Dash Size
|
Inner Diameter |
Outer Diameter |
Maximum Working Pressure
|
Minimum Burst Pressure
|
Minimum Bend Radius |
Reel Quantity* |
-04
|
1/4" |
0.57" |
1,250 psi
|
5,000 psi |
3" |
250 feet
|
-06 |
3/8" |
0.75" |
1,125 psi |
4,500 psi |
4" |
250 feet |
-08 |
1/2" |
0.94" |
1,000 psi
|
4,000 psi |
5" |
250 feet |
-12 |
3/4" |
1.25" |
750 psi
|
3,000 psi |
6" |
250 feet |
-16 |
1" |
1.50" |
565 psi
|
2,250 psi |
8" |
250 feet |
* Reel may not contain one continuous length of hose.
This hose is suitable for hydraulic fluids on mineral oil
and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS,
HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants,
cooling water, and compressed air. Also generally suitable for biologically
degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.
Not suitable for hydraulic fluids on phosphate ester basis
(HFD).
|
