 |
 |
 |
 |
1/2" SAE 100R17 Hydraulic Hose is recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Maximum working pressure: 3,000 psi
Interchanges with Aeroquip FC639-08, Gates 8M3K, Parker 451-8, and Weatherhead H14508
SAE 100R17 Hydraulic Hose Specifications
Product
Number
|
Inside
Diameter
|
Outside
Diameter
|
Maximum
Working Pressure
|
Minimum
Burst Pressure
|
Minimum
Bend Radius
|
R17-04 |
1/4" |
0.50" |
3,000 psi |
12,000 psi |
2" |
R17-06 |
3/8" |
0.66" |
3,000 psi |
12,000 psi |
2.5" |
R17-08 |
1/2" |
0.80" |
3,000 psi |
12,000 psi |
3.5" |
R17-10 |
5/8" |
1.00" |
3,000 psi |
12,000 psi |
4" |
R17-12 |
3/4" |
1.12" |
3,000 psi |
12,000 psi |
4.75" |
R17-16 |
1" |
1.48" |
3,000 psi |
12,000 psi |
6" |
Inner tube: |
Oil-resistant synthetic rubber |
Reinforcement: |
One braid of high-tensile steel wire |
Outer cover: |
Oil and abrasion-resistant synthetic rubber |
Temp. range: |
-40°F to +212°F (Max. 248°F intermittent) |
Use the below table to determine the hose protection option for your hydraulic hose
Product
Number
|
Outside
Diameter
|
Plastic Spiral Guard (NFSGX)
|
Nylon Protective Sleeving (NPS)
|
Steel Hose Armor (HA)
|
Fire-Resistant Sleeving
|
R17-04
|
0.50"
|
NFSGX16
|
NPS-076
|
HA-1S
|
1310-08
|
R17-06
|
0.66"
|
NFSGX20
|
NPS-076
|
HA-3S
|
1910-12
|
R17-08
|
0.80"
|
NFSGX25
|
NPS-105
|
HA-4S
|
2210-14
|
R17-10
|
1.00"
|
NFSGX32
|
NPS-105
|
HA-5S
|
2510-16
|
R17-12
|
1.12"
|
NFSGX32
|
NPS-122
|
HA-14S
|
3210-20
|
R17-16
|
1.48"
|
NFSGX50
|
NPS-153
|
HA-9S
|
3810-24
|
This hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.Not suitable for hydraulic fluids on phosphate ester basis (HFD).
|
|
 |
 |
 |
 |

|