Secure Checkout

Thumbnail Filmstrip of 3384-10 | 5/8" Black PUSH-LOCK (by the foot) Images

    3384-10 | 5/8" Black PUSH-LOCK  (by the foot)
    graphics/00000001/3384-04-1.jpg
    36818 3384-10
    Purchase 3384-10 | 5/8" Black PUSH-LOCK (by the foot)

    SKU: 3384-10
    3384-10 | 5/8" Black PUSH-LOCK (by the foot)

    Maximum Working Pressure: 250 PSI

    3.78

    $3.78 / per foot


    +
     

    Tell A Friend

    Processing...
    Your message has been sent. Thank you for sharing!
    An error has occurred. Please try your request again.

    Prop-65-WarningWARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov


    5/8" 3384 Black Push-Lock Hose is recommended for low pressure air, oil, fuel and water lines. No clamps or ferrules needed when used with Push-Lock Hose Barbs Maximum working pressure: 250 psi

    Use this product with the following hose fittings:

    Push-Lock Barbs



    Product
    Number
    Inside
    Diameter
    Outside
    Diameter
    Maximum
    Working Pressure
    Minimum
    Burst Pressure
    Minimum
    Bend Radius
    3384-04 1/4" 0.50" 250 psi 1,000 psi 3"
    3384-06 3/8" 0.62" 250 psi 1,000 psi 3"
    3384-08 1/2" 0.75" 250 psi 1,000 psi 5"
    3384-10 5/8" 0.91" 250 psi 1,000 psi 6"
    3384-12 3/4" 1.03" 250 psi 1,000 psi 7"

    Inner tube: Oil-Resistant Nittrile (BTR) tube
    Reinforcement: Braided textile reinforcement
    Outer cover: Oil and abrasion resistant Neoprene (CR)
    Temp. range: -40°F to +212°F
    Water not to exceed 150°F
    Air not to exceed 160°F
    This hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives. Not suitable for hydraulic fluids on phosphate ester basis (HFD).






    Customers Also Bought

    Processing...

    R16-10-ASB | 5/8" SAE 100R16 Hydraulic Hose Assembly

    $10.50

    This item cannot be purchased via Quick Add. Please visit the product's page to make your purchase!

    R1-08-ASB | 1/2" SAE 100R1AT Hydraulic Hose Assembly

    $10.50

    This item cannot be purchased via Quick Add. Please visit the product's page to make your purchase!

    R16-12-ASB | 3/4" SAE 100R16 Hydraulic Hose Assembly

    $10.50

    This item cannot be purchased via Quick Add. Please visit the product's page to make your purchase!

    Additional Items Total
    $0.00