 |
 |
 |
|
Product description 1/4" R14 PTFE Hose is recommended for hot air, steam, compressor discharge and most chemical applications. Maximum working pressure: 3,000 psi
Interchanges with Weatherhead H243 and Aeroquip 2807.
goes here
Product
Number
|
Inside
Diameter
|
Outside
Diameter
|
Maximum
Working Pressure
|
Minimum
Burst Pressure
|
Minimum
Bend Radius
|
R14-04 |
3/16"
|
.30"
|
3,000 psi
|
12,000 psi
|
2"
|
|
R14-05
|
1/4"
|
.38"
|
3,000 psi
|
12,000 psi
|
3"
|
|
R14-06
|
5/16"
|
.44"
|
2,500 psi
|
10,000 psi
|
4"
|
|
R14-07
|
3/8"
|
.52"
|
2,000 psi
|
8,000 psi
|
5"
|
|
R14-08
|
13/32"
|
.54"
|
2,000 psi
|
8,000 psi
|
5"
|
|
R14-10
|
1/2"
|
.63"
|
1,500 psi
|
6,000 psi
|
6-1/2"
|
|
R14-12
|
5/8"
|
.76"
|
1,200 psi
|
4,800 psi
|
7-1/2"
|
|
R14-14
|
3/4"
|
.89"
|
1,000 psi
|
4,000 psi
|
8-1/2"
|
|
R14-16
|
7/8"
|
1.03"
|
1,000 psi
|
4,000 psi
|
9"
|
|
R14-18
|
1"
|
1.22"
|
1,000 psi
|
4,000 psi
|
12"
|
|
Inner tube:
|
PTFE |
|
Reinforcement:
|
One braid of Type 304 Stainless Steel |
|
Temp. range:
|
-65°F to +450°F |
This hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.
Not suitable for hydraulic fluids on phosphate ester basis (HFD).
A Word About Hose Orientation...
To help assist you with hose orientation questions please refer to the graphic below. When selecting a hose with multiple angled fittings, simply let us know how to orient the fittings in the Order Notes field at checkout. If you have any questions, you can always use live chat, or call us with any questions! 
|
|
|
 |
|
 |
|
