Have a question? Call us at 800-535-1302
You are here: Home > Hose & Tubing > Made-to-Order Hose Assemblies

Made-To-Order Hose Assemblies

Our professional-grade hydraulic hoses and fittings can be assembled in our workshop to your precise specifications. In order to ensure your hose is made correctly, please refer to our graphic below regarding how to properly measure the "Overall Length" for your custom-made assembly. If you have any questions, please contact us before placing your order. We have always offered this service and now, we have made hose assemblies easy to order as well.

Begin your custom hose assembly by specifying a hose I.D. or specialty hose type below:

The above table will bring you to Custom Made-To-Order Hose Assemblies.

If you are looking to just purchase bulk hose - please click here.
How Do I Measure My Hose Assembly?
Please use the below photo as a reference on how to measure your Overall Length for assemblies.

If you have any questions on how to measure your assembly, please contact us before submitting your order. We are unable to provide refunds for custom-made assemblies.

A Word About Hose Orientation...

Here at DiscountHydraulicHose, we offer a wide range of fittings for your custom hose assembly. With that, you can order a hose with two 90 fittings, one 90 and one 45 and a few other combinations. When ordering a hose with angled fittings, please refer to the below chart to instruct us on how to assembly the hoses. Please note that while many hose ends are considered "swivel" fittings, this swivel is just for installation and a 90 hose fitting will not rotate once we crimp it.

Not sure what hose or fittings you need?

We are glad to help! You can mail in your hoses for our technical staff to measure, review and determine the correct fittings. We will then assemble new hoses and ship them back to you! If your interested in this, please give us a call, or chat live with our helpful team to learn more!

Understanding Hose Routing and Installation

It is critical when working with hydraulic hoses that care is given to the layout and design of the hose installation so that you do not exceed any manufacturer recommendations, and to ensure safe and reliable operation of your equipment.
The first major component is allowing for slack in a hose assembly. Under pressure, hoses can stretch and shrink. If a hose is twisted during installation, it can cause the fittings to loosen as the hose under pressure will want to straighten.
Allow for flex in hoses that are subject to movement with equipment, and use braces where needed to keep the hose from becoming tangled. Use Adapters! Don't be afraid to use a straight hose end and a 90 or 45 adapter to create the end result to keep hoses simple.
Hose placement near an exhaust or manifold must use care. Use heat resistant sleeving or brackets to route the hose out of harms way. Where a hose bends, ensure you are within the minimum bend radius of the hose selected. Too tight a bend may kink the hose.

Join Our Mailing List

Sign Up to receive exclusive offers and product announcements

Free Ground Shipping
with $4500 Purchase

Some limits apply