Inverted Flare

Inverted Flare Hydraulic Tube Fittings

Recommended or use in hydraulic brake, power steering, fuel lines and transmission cooler lines. Inverted flare fittings are inexpensive and reusable. Inverted flare provides excellent vibration resistance. Seats and threads are internal and protected. Short nut (available in brass or steel) allows very close tube bends. Working pressure: up to 2,000 psi depending on tube size. Temperature range: -65°F to +250°F at maximum operating pressures.

**3100 | Inverted Flare Tube Nut (Brass)**

**315 | SAE 45° Flare x Inverted Flare Adapter**

**3202 | Inverted Flare x NPTF Male Pipe**

**3252 | Inverted Flare x NPTF Female Pipe**

**3352 | Inverted Flare x NPTF Male Pipe 45° Elbow**

**3402 | Inverted Flare x NPTF Male Pipe 90° Elbow**

**3452 | Inverted Flare x NPTF Female Pipe 90° Elbow**

**3602 | Inverted Flare x NPTF Male Pipe Branch Tee**

**3652 | Inverted Flare x NPTF Female Pipe Branch Tee**

**3752 | Inverted Flare x NPTF Male Pipe Run Tee**

Recommended for use in hydraulic brake, power steering, fuel lines and transmission cooler lines.