British & Metric
If you have equipment manufactured overseas, maintaining that equipment may present more challenges than usual. Whether you need British Standard Pipe, metric, or Japanese fittings, you'll find them here.
Banjo Adapters
Banjo Adapters in Metric and British as well as Hose Barb Configuration
British Standard Pipe (BSP)
British Standard Pipe fittings and connectors are available in two versions, with parallel threads (BSPP) or tapered threads (BSPT)
British Standard Pipe Taper (BSPT)
The BSPT connection is similar to National Pipe Tapered Fuel (NPTF), except the thread pitches are different in most sizes. The thread form and outside diameters are close, but not the same. Sealing is accomplished by thread distortation.
DIN 2353 Tube Fittings / Metric Compression
24° DIN 2353 (Bite-Type) Tube Fittings + Metric Compression Fittings
Metric Fittings
DIN specifications are controlled by Germany, but other countries use them as a reference for their connector and port designs. All metric fittings are measured in millimeters. Unless otherwise specified, the size refers to the outside diameter.
Japanese Cone Seat (JIS 30)
The JIS 30° is similar to the SAE 37° flare (JIC) connection. However, the flare angle and dimensions are different. The threads are similar to BSPP.
Specialty Mobile (Komatsu, Kobelco, JSW)
Fittings and adapters for Komatsu (metric JIS 30°), Kobelco, JSW and BSPP Flat-Face (HIAB).
