Stainless Steel (316 & 304)
High pressure hydraulic tube and pipe fittings made from Type 316 Stainless Steel for maximum corrosion resistance. Stainless steel is recommended for marine applications, chemical processing and other harsh operating conditions.

Pipe Fittings (Stainless)
National Pipe Tapered Fuel (NPTF) is widely used in hydraulic applications. The thread is tapered and the seal takes place by deformation of the threads.

Female Pipe Swivels (NPSM) (Stainless)
The National Pipe Straight Mechnical (NPSM) female fitting has a straight thread and an inverted 30° seat. The male fitting has a parallel thread and a 30° internal chamfer.

JIC 37° Fittings (Stainless)
SAE 37° flare (JIC) hydraulic fitting is the most common hydraulic hose connection in use today. Both the male and female fittings have 37° seat. Also commonly used with flared hydraulic tubing.

O-Ring Boss (ORB) Fittings (Stainless)
Recommended by the NFPA for optimal leakage control in medium and high pressure hydraulic systems. The male fitting has a straight thread and O-ring that sits behind the thread.

Flareless Compression Tube Fittings (Stainless)
Flareless Compression fittings connect most types of metal hydraulic tubing without needing to flare the tube ends.

British Standard Pipe (BSP) (Stainless)
The BSPP connection is similar to National Pipe Straight Mechanical (NPSM), except the the thread pitches are different in most sizes. The BSPP female swivel has a tapered nose/Globeseal flareless swivel which seals on the cone seat of the male.