 |
 |
 |
|
3/4" SAE 100R2AT Hydraulic Hose is recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Maximum working pressure: 3,120 psi
Interchanges with Aeroquip FC212-12, Gates 12G2, Parker 301-12, and Weatherhead H42512
SAE 100R2AT Hydraulic Hose Specifications
Product
Number |
Inside
Diameter |
Outside
Diameter |
Maximum
Working Pressure |
Minimum
Burst Pressure |
Minimum
Bend Radius
|
| R2-04 |
1/4" |
0.59" |
5,800 psi |
23,200 psi |
4" |
| R2-06 |
3/8" |
0.75" |
4,785 psi |
19,140 psi |
5" |
| R2-08 |
1/2" |
0.88" |
4,000 psi |
16,000 psi |
7" |
| R2-10 |
5/8" |
0.98" |
3,625 psi |
14,500 psi |
8" |
| R2-12 |
3/4" |
1.16" |
3,120 psi |
12,480 psi |
9.5" |
| R2-16 |
1" |
1.50" |
2,395 psi |
9,580 psi |
12" |
| R2-20 |
1-1/4" |
1.87" |
1,815 psi |
7,260 psi |
16.5" |
| R2-24 |
1-1/2" |
2.17" |
1,305 psi |
5,220 psi |
20" |
| R2-32 |
2" |
2.66" |
1,160 psi |
4,640 psi |
25" |
| Inner tube: |
Oil-resistant synthetic rubber |
| Reinforcement: |
Two braids of high-tensile steel wire |
| Outer cover: |
Oil and abrasion-resistant synthetic rubber |
| Temp. range: |
-40°F to +212°F (Max. 248°F intermittent) |
This hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.Not suitable for hydraulic fluids on phosphate ester basis (HFD).
|
|
|
 |
|
 |
|
