Processing...
Part #: 3384-06

3384-06 | 3/8" Black PUSH-LOCK (by the foot)


Maximum Working Pressure: 250 PSI

$2.31 / per foot
Please enter the number of feet you'd like as the quantity below, and we will cut and ship you a complete piece at that length.

Please enter feet or less in the quantity box below.


WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov


Product Description
Technical Specifications
Extended Information
Product Warnings
Product Q&A
3/8" 3384 Black Push-Lock Hose is recommended for low pressure air, oil, fuel and water lines. No clamps or ferrules needed when used with Push-Lock Hose Barbs Maximum working pressure: 250 psi

Use this product with the following hose fittings:

Push-Lock Barbs

Product
Number
Inside
Diameter
Outside
Diameter
Maximum
Working Pressure
Minimum
Burst Pressure
Minimum
Bend Radius
3384-04 1/4" 0.50" 250 psi 1,000 psi 3"
3384-06 3/8" 0.62" 250 psi 1,000 psi 3"
3384-08 1/2" 0.75" 250 psi 1,000 psi 5"
3384-10 5/8" 0.91" 250 psi 1,000 psi 6"
3384-12 3/4" 1.03" 250 psi 1,000 psi 7"

Inner tube: Oil-Resistant Nittrile (BTR) tube
Reinforcement: Braided textile reinforcement
Outer cover: Oil and abrasion resistant Neoprene (CR)
Temp. range: -40°F to +212°F
Water not to exceed 150°F
Air not to exceed 160°F
This hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives. Not suitable for hydraulic fluids on phosphate ester basis (HFD).

WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov