Processing...
Part #: R1-06

R1-06 | 3/8" SAE 100R1AT Hydraulic Hose (by the foot)


Pressure Rating:   2,250 PSI

$1.68 / per foot
Please enter the number of feet you'd like as the quantity below, and we will cut and ship you a complete piece at that length.

Please enter feet or less in the quantity box below.


WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov


Product Description
Technical Specifications
Product Interchange
Product Q&A

R1 hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

Not suitable for hydraulic fluids on phosphate ester basis (HFD).

Use this hose with:

Use this product with the following hose fittings:

Braided Hose Fittings

Standard crimp
Interchanges with
Weatherhead U Series


W Series Hose Fittings

Bite-to-the-wire peformance

43 Series Hose Fittings

Parker-Compatible 43 Series Fittings

Field-Attachable Hose Fittings

SAE 100R1AT hose only
Product
Number
Inside
Diameter
Outside
Diameter
Maximum
Working Pressure
Minimum
Burst Pressure
Minimum
Bend Radius
R1-04 1/4" 0.53" 2,750 PSI 11,000PSI 4"
R1-06 3/8" 0.69" 2,250 PSI 9,000 PSI 5"
R1-08 1/2" 0.82" 2,000 PSI 8,000 PSI 7"
R1-10 5/8" 0.94" 1,500 PSI 6,000 PSI 8"
R1-12 3/4" 1.10" 1,250 PSI 5,000 PSI 9.5"
R1-16 1" 1.41" 1,000 PSI 4,000 PSI 12"
Interchanges with: Weatherhead H104, Parker 421 and Aeroquip FC211.