Secure Checkout

Thumbnail Filmstrip of R1-12-REEL | 3/4" SAE 100R1AT Hydraulic Hose (250 feet) Images

    R1-12-REEL | 3/4" SAE 100R1AT Hydraulic Hose (250 feet)
    graphics/00000001/HOSE REEL2.png

    Reels may not be continuous

    Purchase R1-12-REEL | 3/4" SAE 100R1AT Hydraulic Hose (250 feet)

    PART #: R1-12-REEL
    R1-12-REEL | 3/4" SAE 100R1AT Hydraulic Hose (250 feet)

    $714.08
    Reel May Not Be Continuous

    ONLY $2.86 PER FOOT!







    R1 hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

    Not suitable for hydraulic fluids on phosphate ester basis (HFD).

    Use this hose with:

    Use this product with the following hose fittings:

    Braided Hose Fittings

    Standard crimp
    Interchanges with
    Weatherhead U Series


    W Series Hose Fittings

    Bite-to-the-wire peformance

    43 Series Hose Fittings

    Parker-Compatible 43 Series Fittings

    Field-Attachable Hose Fittings

    SAE 100R1AT hose only


    Product
    Number
    Inside
    Diameter
    Outside
    Diameter
    Maximum
    Working Pressure
    Minimum
    Burst Pressure
    Minimum
    Bend Radius
    R1-04 1/4" 0.53" 2,750 PSI 11,000PSI 4"
    R1-06 3/8" 0.69" 2,250 PSI 9,000 PSI 5"
    R1-08 1/2" 0.82" 2,000 PSI 8,000 PSI 7"
    R1-10 5/8" 0.94" 1,500 PSI 6,000 PSI 8"
    R1-12 3/4" 1.10" 1,250 PSI 5,000 PSI 9.5"
    R1-16 1" 1.41" 1,000 PSI 4,000 PSI 12"


    Hose Features
    Inner Tube Material Oil-resistant Synthetic Rubber
    Reinforcement 1 braid of high tensile steel wire.
    Cover Protection Oil and Abrasion-Resistant synthetic rubber
    Temperature Rating -40°F to 212°F
    Specialty Compatible with Field Reusable Fittings