R1-16 | 1
Processing...
Code: R1-16

R1-16 | 1" SAE 100R1AT Hydraulic Hose (by the foot)


$3.05

WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov


Product Description
Technical Specifications
Product Interchange
Product Warnings

R1 hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

Not suitable for hydraulic fluids on phosphate ester basis (HFD).

Use this hose with:


Standard/Braided Hose Fittings

Interchanges with Weatherhead U Series

- or -

R1 Reusable Hose Fittings

 

 

Untitled Document
Hose
Number
Inside
Diameter
Outside
Diameter
Maximum Working
Pressure (MWP)
Minimum
Burst Pressure
Minimum
Bend Radius
R1-04 1/4" 0.53" 2,750 psi 11,000 psi 4"
R1-06 3/8" 0.69" 2,250 psi
9,000 psi 5"
R1-08 1/2" 0.82" 2,000 psi 8,000 psi 7"
R1-10 5/8" 0.94" 1,500 psi 6,000 psi 8"
R1-12 3/4" 1.10" 1,250 psi 5,000 psi 9.5"
R1-16 1" 1.41" 1,000 psi 4,000 psi 12"

Tube: Oil-resistant synthetic rubber
Reinforcement: One braid of high-tinsile steel wire
Cover: Oil and Abrasion-resistant synthetic rubber
Temperature: -40°F to +212°F

Interchanges with: Weatherhead H104, Parker 421 and Aeroquip FC211.

WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov