graphics/00000001/HOSE REEL2.png

Reels may not be continuous

Part #: R17-12-REEL

R17-12-REEL | 3/4" SAE 100R17 Hydraulic Hose (200 feet)

Reel May Not Be Continuous



Pressure Rating: 3,000 psi

prop-65-warningWARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

Product Reviews

Product Description
Technical Specifications
Extended Information
Product Q&A
3/4" SAE 100R17 Hydraulic Hose is recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Maximum working pressure: 3,000 psi

Interchanges with Aeroquip FC639-12, Gates 12M3K, Parker 451-12, and Weatherhead H14512

Use this product with the following hose fittings:

Braided Hose Fittings

Standard crimp
Interchanges with
Weatherhead U Series

W Series Hose Fittings

Bite-to-the-wire peformance
Working Pressure
Burst Pressure
Bend Radius
R17-04 1/4" 0.50" 3,000 PSI 12,000 PSI 2"
R17-06 3/8" 0.66" 3,000 PSI 12,000 PSI 2.5"
R17-08 1/2" 0.80" 3,000 PSI 12,000 PSI 3.5"
R17-10 5/8" 1.00" 3,000 PSI 12,000 PSI 4"
R17-12 3/4" 1.12" 3,000 PSI 12,000 PSI 4.75"
R17-16 1" 1.48" 3,000 PSI 12,000 PSI 6"

Hose Features
Inner Tube Material Oil-resistant Synthetic Rubber
Reinforcement 1-Wire Braid ( Size 8 and below.)  2-Wire braid of high tensile steel wire. (Size 10 and above.)
Cover Protection Oil and Abrasion-Resistant synthetic rubber
Temperature Rating -40°F to 212°F
Specialty 3000 Psi Constant & Half Bend Radius of SAE100R2
Product Code Outside Diameter Spiral Guard Nylon Protective Sleeve Fast Wrap Hose Armor Spring Guard Bend Restrictor Fire Jacket
R17-04 0.50 NFSGX16 NPS-076 FST150 HA-1S SG-1S HB20 1310-08
R17-06 0.66 NFSGX16 NPS-076 FST150 HA-3S SG-12S HB40 1910-12
R17-08 0.80 NFSGX16 NPS-106 FST150 HA-4S SG-14S HB80 2210-14
R17-10 1.00 NFSGX20 NPS-106 FST150 HA-5S SG-4S N/A 2510-16
R17-12 1.12 NFSGX25 NPS-122 FST150 HA-14S SG-7S N/A 3210-20
R17-16 1.48 NFSGX32 NPS-154 FST150 HA-9S SG-7S N/A 3810-24

This hose is 
suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

Not suitable for hydraulic fluids on phosphate ester basis (HFD).