Code: R17-16-ASB
R17-16-ASB | 1" SAE 100R17 Hydraulic Hose Assembly
Not looking for a custom made hose assembly? This product is also sold by the foot, and by complete reels.
Pressure Rating: 3,000 psi
Cost Per Foot:$6.96
Assembly Fee: $10.50
Product Description
Technical Specifications
Extended Information
Product Interchange
Product Q&A
Conversion Chart
1" SAE 100R17 Hydraulic Hose is recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Maximum working pressure: 3,000 psi
Interchanges with Aeroquip FC639-16, Gates 16M3K, Parker 451-16, and Weatherhead H14516
Interchanges with Aeroquip FC639-16, Gates 16M3K, Parker 451-16, and Weatherhead H14516
| Use this product with the following hose fittings: | |||
 Braided Hose Fittings Standard crimp Interchanges with Weatherhead U Series |
 W Series Hose Fittings Bite-to-the-wire peformance |
 43 Series Hose Fittings Parker-Compatible 43 Series Fittings |
 Field-Attachable Hose Fittings SAE 100R1AT hose only |
| Product Number |
Inside Diameter |
Outside Diameter |
Maximum Working Pressure |
Minimum Burst Pressure |
Minimum Bend Radius |
|---|---|---|---|---|---|
| R17-04 | 1/4" | 0.50" | 3,000 PSI | 12,000 PSI | 2" |
| R17-06 | 3/8" | 0.66" | 3,000 PSI | 12,000 PSI | 2.5" |
| R17-08 | 1/2" | 0.80" | 3,000 PSI | 12,000 PSI | 3.5" |
| R17-10 | 5/8" | 1.00" | 3,000 PSI | 12,000 PSI | 4" |
| R17-12 | 3/4" | 1.12" | 3,000 PSI | 12,000 PSI | 4.75" |
| R17-16 | 1" | 1.48" | 3,000 PSI | 12,000 PSI | 6" |
| Hose Features | |
|---|---|
| Inner Tube Material | Oil-resistant Synthetic Rubber |
| Reinforcement | 1-Wire Braid ( Size 8 and below.) 2-Wire braid of high tensile steel wire. (Size 10 and above.) |
| Cover Protection | Oil and Abrasion-Resistant synthetic rubber |
| Temperature Rating | -40°F to 212°F |
| Specialty | 3000 Psi Constant & Half Bend Radius of SAE100R2 |
| Product Code | Outside Diameter | Spiral Guard | Nylon Protective Sleeve | Fast Wrap | Hose Armor | Spring Guard | Bend Restrictor | Fire Jacket |
|---|---|---|---|---|---|---|---|---|
| R17-04 | 0.50 | NFSGX16 | NPS-076 | FST150 | HA-1S | SG-1S | HB20 | 1310-08 |
| R17-06 | 0.66 | NFSGX16 | NPS-076 | FST150 | HA-3S | SG-12S | HB40 | 1910-12 |
| R17-08 | 0.80 | NFSGX16 | NPS-106 | FST150 | HA-4S | SG-14S | HB80 | 2210-14 |
| R17-10 | 1.00 | NFSGX20 | NPS-106 | FST150 | HA-5S | SG-4S | N/A | 2510-16 |
| R17-12 | 1.12 | NFSGX25 | NPS-122 | FST150 | HA-14S | SG-7S | N/A | 3210-20 |
| R17-16 | 1.48 | NFSGX32 | NPS-154 | FST150 | HA-9S | SG-7S | N/A | 3810-24 |
This hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.
Not suitable for hydraulic fluids on phosphate ester basis (HFD).
Interchanges with Aeroquip FC639-04, Gates 4M3K, Parker 451-4, and Weatherhead H14504
Length Converter
Type a value in the Feet field to convert the value to Inches:
Inches:
