R13-12-ASB | 3/4" SAE 100R13 Hydraulic Hose Assembly
Processing...
Code: R13-12-ASB

R13-12-ASB | 3/4" SAE 100R13 Hydraulic Hose Assembly


Not looking for a custom made hose assembly? This product is also sold by the foot.

Pressure Rating:   5,000 PSI

Cost Per Foot:$16.20

Assembly Fee: $10.00

Choose Your Options

Hose Fittings

+ $0.00

Attention – it is not recommended to use these angled fittings together. We highly recommend using a Straight Fitting on one end, with an adapter to make the desired installation, and the angled fitting on the other end. This is to make installation of the hose easier.

Orientation

Please select how these fittings should be orientated to each other

Please select how these fittings should be orientated to each other.

Select Orientation

Overall Length (includes fittings)

+ $0.00

Value must be between 6 – 1200

Hose Assembly Length Information

Hose Assembly Length Information

Would you like hose protection?

+ $0.00

Installation Fee: $1/foot

Hose Protection Information

Hose Protection Information

Would you like a hose label attached?

+ $0.00

Please select a Hose Label option.

Hose Label

Hose Label

Reference / Hose Name Text (Optional):
If blank, our standard label will be attached.
Limited to 30 characters.

+ $0.00

I only want one end of the hose crimped, the other end will be open.

+ $0.00

Total:$10.00

Whoops

You are trying to purchase a hose assembly without any fittings...are you just looking for bulk hose? if so, click here to order.

X

DIY Hose Protection Options

Would you like to add a Hose Protection separately?





Whoops

You must enter a length in the Inches field.

Are you sure you only want one fitting crimped on?

Product Description
Technical Specifications
Product Interchange
Product Warnings
Conversion Chart

R13 hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

Not suitable for hydraulic fluids on phosphate ester basis (HFD).

Use this hose with:

Use this product with the following hose fittings:

Braided Hose Fittings

Standard crimp
Interchanges with
Weatherhead U Series


W Series Hose Fittings

Bite-to-the-wire peformance

43 Series Hose Fittings

Parker-Compatible 43 Series Fittings

Field-Attachable Hose Fittings

SAE 100R1AT hose only
Untitled Document
Hose
Number
Inside
Diameter
Outside
Diameter
Maximum Working
Pressure (MWP)
Minimum
Burst Pressure
Minimum
Bend Radius
R13-12 3/4" 1.26" 5,000 20,000 9.5"
R13-16 1" 1.54" 5,000 20,000 12"
R13-20 1-1/4" 1.96" 5,000 20,000 16.5"
R13-24 1-1/2" 2.26" 5,000 20,000 20"
R13-32 2" 2.8" 5,000 20,000 25"

Tube: Oil-resistant synthetic rubber
Reinforcement: Six braids of high tensile steel wire (sizes -12 and -16 have four layers)
Cover: Oil and Abrasion-resistant synthetic rubber
Temperature: -40°F to +250°F

Interchanges with: Aeroquip FC273, Parker 78C, Weatherhead H470, SAE 100R13

WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

Length Converter

Type a value in the Feet field to convert the value to Inches:

Inches: