R16-08-ASB | 1/2" SAE 100R16 Hydraulic Hose Assembly
Code: R16-08-ASB

R16-08-ASB | 1/2" SAE 100R16 Hydraulic Hose Assembly

Not looking for a custom made hose assembly? This product is also sold by the foot, and by complete reels.

Pressure Rating:   3,980 PSI

Cost Per Foot:$2.88

Assembly Fee: $10.00

Choose Your Options

Hose Fittings

+ $0.00

Attention – it is not recommended to use these angled fittings together. We highly recommend using a Straight Fitting on one end, with an adapter to make the desired installation, and the angled fitting on the other end. This is to make installation of the hose easier.


Please select how these fittings should be orientated to each other

Please select how these fittings should be orientated to each other.

Select Orientation

Overall Length (includes fittings)

+ $0.00

Value must be between 6 – 1920

Hose Assembly Length Information

Hose Assembly Length Information

Would you like hose protection?

+ $0.00

Installation Fee: $1/foot

Hose Protection Information

Hose Protection Information

Would you like a hose label attached?

+ $0.00

Please select a Hose Label option.

Hose Label

Hose Label

Reference / Hose Name Text (Optional):
If blank, our standard label will be attached.
Limited to 30 characters.

+ $0.00

I only want one end of the hose crimped, the other end will be open.

+ $0.00



You are trying to purchase a hose assembly without any fittings...are you just looking for bulk hose? if so, click here to order.


DIY Hose Protection Options

Would you like to add a Hose Protection separately?


You must enter a length in the Inches field.

Are you sure you only want one fitting crimped on?

Product Description
Technical Specifications
Product Interchange
Product Warnings
Conversion Chart
1/2" SAE 100R16 Hydraulic Hose is recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Maximum working pressure: 3,980 psi

Interchanges with Aeroquip GH781-08, Gates 8M2T, Parker 431-8, and Weatherhead H24508

Use this product with the following hose fittings:

Braided Hose Fittings

Standard crimp
Interchanges with
Weatherhead U Series

W Series Hose Fittings

Bite-to-the-wire peformance

43 Series Hose Fittings

Parker-Compatible 43 Series Fittings

Field-Attachable Hose Fittings

SAE 100R1AT hose only
SAE 100R16 Hydraulic Hose Specifications
Working Pressure
Burst Pressure
Bend Radius
R16-04 1/4" 0.55" 5,800 psi 23,200 psi 2"
R16-06 3/8" 0.67" 4,780 psi 19,120 psi 2.5"
R16-08 1/2" 0.81" 3,980 psi 15,920 psi 3.5"
R16-10 5/8" 0.93" 3,620 psi 14,480 psi 4"
R16-12 3/4" 1.07" 3,110 psi 12,440 psi 4.75"
R16-16 1" 1.37" 2,390 psi 9,560 psi 6"

Inner tube: Oil-resistant synthetic rubber
Reinforcement: Two braids of high-tensile steel wire
Outer cover: Oil and abrasion-resistant synthetic rubber
Temp. range: -40°F to +212°F
Interchanges with Aeroquip GH781-04, Gates 4M2T, Parker 431-4, and Weatherhead H24504

WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

Length Converter

Type a value in the Feet field to convert the value to Inches: