1-3/8" Inside Diameter Hoses
Select your hose type below to begin configuration.
Some hoses may offer a choice of fittings (Standard or Bite-To-The Wire). Select the hose product below that lists your desired fittings before proceeding to the next step. On the product detail page, you will be able to choose overall length, hose connector (Female JIC, Male Pipe, etc.), and other options including hose protection (not available with all hoses).
Cost Per Foot:
$24.00
Check out our video on how to measure your custom assembly before ordering!
Understanding Orientation Options
Check out our video on Hose Orientation Options before ordering!
When you are assembling a hydraulic hose, you have a choice of end fittings that could be straight, 45¦deg;, 90¦deg; and other combinations. When you choose two angled fittings, such as a 90¦deg; and a 45¦deg; fitting, we need to know how they should be installed so you can put the hose back on your equipment. Use this chart below to provide us the accurate orientation. Please call our office before ordering if you are unsure of your hose orientation options!
Understanding "Swivel" Fittings
When you see the word "Swivel" in a hose fitting descritpion, this means that the end nut will swivel for installation purposes only . This swivel will not rotate once the fitting is properly installed in the mating connector. If you need a swivel that will function under pressure, please look into our Full-Time Swivel Joints .
