3/8 Inch Inside Diameter Custom Hose Assemblies

Select your hose type below to begin configuration.

Select the product below that lists your desired fittings before proceeding to the next step.

On the product detail page, you will be able to choose overall length, connector (Female JIC, Male Pipe, etc.), and other options including hose protection (not available with all hoses).
Some hoses may offer a choice of fittings (Standard or Bite-To-The Wire).

**HT-06-ASB | 3/8" HYDRAULAX TOUGH™ Hydraulic Hose Assembly**

Pressure Rating: 5,585 psi

Online: $10.50

Cost Per Foot:

$3.72

**R1-06-ASB | 3/8" SAE 100R1AT Hydraulic Hose Assembly**

Pressure Rating: 2,250 psi

Online: $10.50

Cost Per Foot:

$1.92

**R2-06-ASB | 3/8" SAE 100R2AT Hydraulic Hose Assembly**

Pressure Rating: 4,785 psi

Online: $10.50

Cost Per Foot:

$2.64

**R16-06-ASB | 3/8" SAE 100R16 Hydraulic Hose Assembly**

Pressure Rating: 4,780 psi

Online: $10.50

Cost Per Foot:

$3.00

**R17-06-ASB | 3/8" SAE 100R17 Hydraulic Hose Assembly**

Pressure Rating: 3,000 psi

Online: $10.50

Cost Per Foot:

$3.00

**R12-06-ASB | 3/8" SAE 100R12 Hydraulic Hose Assembly**

Pressure Rating: 4,000 psi

Online: $10.50

Cost Per Foot:

$6.48

**R14-07-ASB | 3/8" SAE 100R14A PTFE Hose Assembly**

Pressure Rating: 2,000 psi

Online: $10.50

Cost Per Foot:

$7.80

**R7-06BK-ASB | 3/8" SAE 100R7 Black Thermoplastic Hose Assembly**

Pressure Rating: 2,250 psi

Online: $10.50

Cost Per Foot:

$3.72

**R7-06NC-ASB | 3/8" SAE 100R7 Nonconductive Orange Thermoplastic Hose Assembly**

Pressure Rating: 2,250 psi

Online: $10.50

Cost Per Foot:

$3.84

**PW-06-ASB | 4,000 PSI 3/8" Black Pressure Wash Hose Assembly**

Pressure Rating: 4,000 psi

Online: $10.50

Cost Per Foot:

$1.44

**PWB-06-ASB | 3/8" 4,000 PSI Non-Marking Blue Pressure Washer Hose Assembly**

Pressure Rating: 4,000 psi

Online: $10.50

Cost Per Foot:

$2.16

**PW6K-06-ASB | 3/8" Black 6,000 PSI Pressure Washer Hose Assembly**

Pressure Rating: 6,000 psi

Online: $10.50

Cost Per Foot:

$1.80

Important Information When Ordering A Custom Made Hose Assembly!!

How To Measure Your Custom Hose Assembly

Check out our new video on how to measure your custom assembly before ordering!

Chart to Measure Hydraulic Hose Assembly

Understanding Orientation Options

Check out our new video on Hose Orientation Options before ordering!

When you are assembling a hydraulic hose, you have a choice of end fittings that could be straight, 45¦deg;, 90¦deg; and other combinations. When you choose two angled fittings, such as a 90¦deg; and a 45¦deg; fitting, we need to know how they should be installed so you can put the hose back on your equipment. Use this chart below to provide us the accurate orientation. Please call our office before ordering if you are unsure of your hose orientation options!

Understanding "Swivel" Fittings
Understanding Swivel Fittings

When you see the word "Swivel" in a hose fitting descritpion, this means that the end nut will swivel for installation purposes only . This swivel will not rotate once the fitting is properly installed in the mating connector. If you need a swivel that will function under pressure, please look into our Full-Time Swivel Joints .