PW-06-ASB | 3/8" Black Pressure Wash Hose Assembly
Processing...
Code: PW-06-ASB

PW-06-ASB | 3/8" Black Pressure Wash Hose Assembly


Cost Per Foot:$1.08

Assembly Fee: $10.00

Choose Your Options

Hose Fittings

+ $0.00

Attention – it is not recommended to use these angled fittings together. We highly recommend using a Straight Fitting on one end, with an adapter to make the desired installation, and the angled fitting on the other end. This is to make installation of the hose easier.

Orientation

Please select how these fittings should be orientated to each other

Please select how these fittings should be orientated to each other.

Select Orientation

Overall Length (includes fittings)

+ $0.00

Value must be between 0 – 3000

Hose Assembly Length Information

Hose Assembly Length Information

Would you like hose protection?

+ $0.00

Hose Protection Information

Hose Protection Information

Would you like a hose label attached?

+ $0.00

Hose Label

Hose Label

Add A Hose Bend Restrictor?

+ $0.00

Total:$10.00

Whoops

You are trying to purchase a hose assembly without any fittings...are you just looking for bulk hose? if so, click here to order.

Are you sure you only want one fitting crimped on?

Product Description
Technical Specifications
Product Warnings
Conversion Chart
Recommended for pressure washer applications. Available with a black or non-marking blue cover. Maximum working pressure: 4,000 psi

Use this product with the following hose fittings:

Braided Hose Fittings

Standard crimp
Interchanges with
Weatherhead U Series

Pressure Washer Hose Specifications
Product
Number
Inside
Diameter
Outside
Diameter
Maximum
Working Pressure
Minimum
Burst Pressure
Minimum
Bend Radius
PW-06 3/8" 0.65" 4,000 psi 16,000 psi 3"

Inner tube: Water-resistant synthetic rubber
Reinforcement: One braid of high-tensile steel wire
Outer cover: Abrasion, ozone and weather-resistant synthetic rubber
Temp. range: -40°F to +275°F

WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

Length Converter

Type a value in the Feet field to convert the value to Inches:

Inches: