R1-04-ASB | 1/4" SAE 100R1AT Hydraulic Hose Assembly
Processing...
Code: R1-04-ASB

R1-04-ASB | 1/4" SAE 100R1AT Hydraulic Hose Assembly


Not looking for a custom made hose assembly? This product is also sold by the foot, and by complete reels.

Pressure Rating: 2,750 psi

Cost Per Foot:$1.56

Assembly Fee: $10.00

Choose Your Options

Hose Fittings

+ $0.00

Attention – it is not recommended to use these angled fittings together. We highly recommend using a Straight Fitting on one end, with an adapter to make the desired installation, and the angled fitting on the other end. This is to make installation of the hose easier.

Orientation

Please select how these fittings should be orientated to each other

Please select how these fittings should be orientated to each other.

Select Orientation

Overall Length (includes fittings)

+ $0.00

Value must be between 6 – 3000

Hose Assembly Length Information

Hose Assembly Length Information

Would you like hose protection?

+ $0.00

NPS-076
NFSGX16

Installation Fee: $1/foot

Hose Protection Information

Hose Protection Information

Would you like a hose label attached?

+ $0.00

Please select a Hose Label option.

Hose Label

Hose Label

Reference / Hose Name Text (Optional):
If blank, our standard label will be attached.
Limited to 30 characters.

+ $0.00

I only want one end of the hose crimped, the other end will be open.

+ $0.00

Total:$10.00

Whoops

You are trying to purchase a hose assembly without any fittings...are you just looking for bulk hose? if so, click here to order.

X

DIY Hose Protection Options

Would you like to add a Hose Protection separately?





Whoops

You must enter a length in the Inches field.

Are you sure you only want one fitting crimped on?

Product Description
Technical Specifications
Extended Information
Product Interchange
Conversion Chart

R1 hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

Not suitable for hydraulic fluids on phosphate ester basis (HFD).

Use this hose with:

Use this product with the following hose fittings:

Braided Hose Fittings

Standard crimp
Interchanges with
Weatherhead U Series


W Series Hose Fittings

Bite-to-the-wire peformance

43 Series Hose Fittings

Parker-Compatible 43 Series Fittings

Field-Attachable Hose Fittings

SAE 100R1AT hose only
Product
Number
Inside
Diameter
Outside
Diameter
Maximum
Working Pressure
Minimum
Burst Pressure
Minimum
Bend Radius
R1-04 1/4" 0.53" 2,750 PSI 11,000PSI 4"
R1-06 3/8" 0.69" 2,250 PSI 9,000 PSI 5"
R1-08 1/2" 0.82" 2,000 PSI 8,000 PSI 7"
R1-10 5/8" 0.94" 1,500 PSI 6,000 PSI 8"
R1-12 3/4" 1.10" 1,250 PSI 5,000 PSI 9.5"
R1-16 1" 1.41" 1,000 PSI 4,000 PSI 12"


Hose Features
Inner Tube Material Oil-resistant Synthetic Rubber
Reinforcement 1 braid of high tensile steel wire.
Cover Protection Oil and Abrasion-Resistant synthetic rubber
Temperature Rating -40°F to 212°F
Specialty Compatible with Field Reusable Fittings
Hose Protection

Product Code Outside Diameter Spiral Guard Nylon Protective Sleeve Fast Wrap Hose Armor Spring Guard Bend Restrictor Fire Jacket
R1-04 0.53 NFSGX16 NPS-076 FST150 HA-13S SG-1S HB20 1610-10
R1-06 0.69 NFSGX16 NPS-076 FST150 HA-3S SG-2S HB60 1910-12
R1-08 0.82 NFSGX16 NPS-106 FST150 HA-4S SG-14S HB80 2210-14
R1-10 0.94 NFSGX20 NPS-106 FST150 HA-5S SG-4S N/A 2510-16
R1-12 1.10 NFSGX25 NPS-122 FST150 HA-14S SG-7S N/A 3210-20
R1-16 1.41 NFSGX32 NPS-154 FST150 HA-9S SG-7S N/A 3810-24
Interchanges with: Weatherhead H104, Parker 421 and Aeroquip FC211.

Length Converter

Type a value in the Feet field to convert the value to Inches:

Inches: