Reels may not be continuous
Part #: 3384-04-REEL
3384-04-REEL | 1/4" Black PUSH-LOCK Hose (250 feet)
Maximum Working Pressure: 250 PSI
Please log in to add/update your Custom Part Numbers.
$428.73
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
Product Description
Technical Specifications
Extended Information
Product Q&A
1/4" 3384 Black Push-Lock Hose is recommended for low pressure air, oil, fuel and water lines. No clamps or ferrules needed when used with Push-Lock Hose Barbs Maximum working pressure: 250 psi
| Use this product with the following hose fittings: | |
 Push-Lock Barbs |
|
|
Number |
Diameter |
Diameter |
Working Pressure |
Burst Pressure |
Bend Radius |
| 3384-04 | 1/4" | 0.50" | 250 psi | 1,000 psi | 3" |
| 3384-06 | 3/8" | 0.62" | 250 psi | 1,000 psi | 3" |
| 3384-08 | 1/2" | 0.75" | 250 psi | 1,000 psi | 5" |
| 3384-10 | 5/8" | 0.91" | 250 psi | 1,000 psi | 6" |
| 3384-12 | 3/4" | 1.03" | 250 psi | 1,000 psi | 7" |
| Inner tube: | Oil-Resistant Nittrile (BTR) tube |
| Reinforcement: | Braided textile reinforcement |
| Outer cover: | Oil and abrasion resistant Neoprene (CR) |
| Temp. range: |
-40°F to +212°F Water not to exceed 150°F Air not to exceed 160°F |
This hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives. Not suitable for hydraulic fluids on phosphate ester basis (HFD).
