DiscountHydraulicHose

0

DiscountHydraulicHose

Shop Categories

Secure Checkout
4SH-12-ASB | 3/4" EN 856 4SH Hydraulic Hose Assembly graphics/00000001/4SH-12-1.jpg
    4SH-12-ASB | 3/4" EN 856 4SH Hydraulic Hose Assembly
    Purchase 4SH-12-ASB | 3/4" EN 856 4SH Hydraulic Hose Assembly

    SKU: 4SH-12-ASB
    4SH-12-ASB | 3/4" EN 856 4SH Hydraulic Hose Assembly

    Not looking for a custom made hose assembly? This product is also sold by the foot.

    Pressure Rating: 6,095 psi

    Cost Per Foot:$12.36

    Assembly Fee: $10.50

    Choose Your Options

    Hose Fittings

    + $0.00

    Attention – it is not recommended to use these angled fittings together. We highly recommend using a Straight Fitting on one end, with an adapter to make the desired installation, and the angled fitting on the other end. This is to make installation of the hose easier.

    Orientation

    Please select how these fittings should be orientated to each other
    ₓ

    Please select how these fittings should be orientated to each other.

    Select Orientation

    Overall Length (includes fittings)

    + $0.00

    Value must be between 6 – 1200
    Try our conversion chart
    ₓ

    Hose Assembly Length Information

    Hose Assembly Length Information

    Would you like hose protection?

    + $0.00

    Installation Fee: $1/foot

    ₓ

    Hose Protection Information

    Hose Protection Information

    Would you like a hose label attached?

    + $0.00

    Please select a Hose Label option.

    ₓ

    Hose Label

    Hose Label

    Reference / Hose Name Text (Optional):
    If blank, our standard label will be attached.
    Limited to 30 characters.

    + $0.00

    I only want one end of the hose crimped, the other end will be open.

    + $0.00

    Please Confirm:

    ⚠

    Whoops

    You are trying to purchase a hose assembly without any fittings...are you just looking for bulk hose? if so, click here to order.

    Cancel
    Redirect...
    X

    DIY Hose Protection Options

    Would you like to add a Hose Protection separately?




    No, Thanks
    ⚠

    Whoops

    You must enter a length in the Inches field.

    Cancel

    Are you sure you only want one fitting crimped on?

    No
    Yes



    ₓ

    Length Converter

    Type a value in the Feet field to convert the value to Inches:

    Inches:

    Total:$10.50


    Untitled Document

    4SH-12-ASB is our EN 856 4SH hose assembly with an inside diameter of 3/4 inches. We cut crimp and ship your hose assemblies directly to you. Just fill in your customization preferences above and you will have your hose in no time.

    Four-wire spiral hose. Ideally suited for high-impulse applications. Handles higher pressures than SAE 100R12. No skiving required with W-Series hose fittings (up to size -24 only). Recommended for petroleum and water-based hydraulic fluids in very high pressure applications.

    4SH Hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

    Not suitable for hydraulic fluids on phosphate ester basis (HFD).

    Use this hose with:


    W Series
    Bite-To-The-Wire
    Crimp Fittings
    Up to size -24 only
    JJ Series
    Skive     Crimp Fittings
    Sizes -20, -24 and -32 only