4SH-16-ASB | 1" EN 856 4SH Hydraulic Hose Assembly
Processing...
Code: 4SH-16-ASB

4SH-16-ASB | 1" EN 856 4SH Hydraulic Hose Assembly


Not looking for a custom made hose assembly? This product is also sold by the foot.

Pressure Rating: 5,515 psi

Cost Per Foot:$16.92

Assembly Fee: $10.50

Choose Your Options

Hose Fittings

+ $0.00

Attention – it is not recommended to use these angled fittings together. We highly recommend using a Straight Fitting on one end, with an adapter to make the desired installation, and the angled fitting on the other end. This is to make installation of the hose easier.

Orientation

Please select how these fittings should be orientated to each other

Please select how these fittings should be orientated to each other.

Select Orientation

Overall Length (includes fittings)

+ $0.00

Value must be between 6 – 1200

Hose Assembly Length Information

Hose Assembly Length Information

Would you like hose protection?

+ $0.00

NPS-153
NFSGX50

Installation Fee: $1/foot

Hose Protection Information

Hose Protection Information

Would you like a hose label attached?

+ $0.00

Please select a Hose Label option.

Hose Label

Hose Label

Reference / Hose Name Text (Optional):
If blank, our standard label will be attached.
Limited to 30 characters.

+ $0.00

I only want one end of the hose crimped, the other end will be open.

+ $0.00

Total:$10.50

Whoops

You are trying to purchase a hose assembly without any fittings...are you just looking for bulk hose? if so, click here to order.

X

DIY Hose Protection Options

Would you like to add a Hose Protection separately?





Whoops

You must enter a length in the Inches field.

Are you sure you only want one fitting crimped on?

Product Description
Technical Specifications
Extended Information
Product Interchange
Product Q&A
Conversion Chart
Untitled Document

Four-wire spiral hose. Ideally suited for high-impulse applications. Handles higher pressures than SAE 100R12. No skiving required with W-Series hose fittings (up to size -24 only). Recommended for petroleum and water-based hydraulic fluids in very high pressure applications.

4SH Hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

Not suitable for hydraulic fluids on phosphate ester basis (HFD).

Use this hose with:


W Series
Bite-To-The-Wire
Crimp Fittings

Up to size -24 only

JJ Series
Skive
Crimp Fittings
Sizes -20, -24 and -32 only

Hose
Number
Outside
Diameter
Maximum Working
Pressure (MWP)
Minimum
Burst Pressure
Minimum
Bend Radius
4SH-12 3/4" 1.21" 6,095 24,380 9.5"
4SH-16 1" 1.50" 5,515 22,060 12"
4SH-20 1-1/4" 1.85" 5,000 20,000 16.5"
4SH-24 1-1/2" 2.11" 4,200 16,800 20"
4SH-32 2" 2.63" 3,625 14,500 25"


Hose Features
Inner   Tube Material Oil-resistant Synthetic Rubber
Reinforcement 4-Wire braid of high tensile steel wire.
Cover Protection Oil and Abrasion-Resistant synthetic rubber
Temperature Rating -40°F to 212°F
Product Code Outside Diameter Spiral Guard Nylon Protective Sleeve Fast Wrap Hose Armor Spring Guard Bend Restrictor Fire Jacket
4SH-12 1.21 NFSGX25 NPS-122 FST150 HA-6S SG-7S N/A 3210-20
4SH-16 1.50 NFSGX32 NPS-154 FST150 HA-9S SG-7S N/A 3810-24
4SH-20 1.85 NFSGX40 NPS-185 FST200 HA-8S SG-8S N/A 5110-32
4SH-24 2.11 NFSGX40 NPS-260 FST-250 HA-10S SG-8S N/A N/A
4SH-32 2.63 NFSGX63 NPS-287 N/A N/A SG-11S N/A N/A
Interchanges with: Aeroquip GH506, Parker 731, Weatherhead H464, EN 856 4SH, DIN 20 023-4SH

Length Converter

Type a value in the Feet field to convert the value to Inches:

Inches: