🚚 Shipping Notice: Shipping will stop at 12 PM Friday, October 30th, and resume normally Monday, November 2nd.
Please login to see inventory.
Slide to Change Material:
Please log in to add/update your Custom Part Numbers.
Volume Discounts
FJX-04-04 connects 1/4 inch hydraulic hose to a 1/4 inch JIC 37 degree female swivel connection. The female swivel uses a cone seat that mates with the 37 degree flare on a compatible JIC male fitting to create a reliable high pressure seal.
The swivel connection simplifies installation and helps align the hose without rotating the entire assembly.
HT-04 | 1/4" HYDRAULAX TOUGH Hydraulic Hose (by the foot)
HT-06 | 3/8" HYDRAULAX TOUGH™ Hydraulic Hose (by the foot)
HT-08 | 1/2" HYDRAULAX TOUGH™ Hydraulic Hose (by the foot)
HT-10 | 5/8" HYDRAULAX TOUGH™ Hydraulic Hose (by the foot)
HT-12 | 3/4" HYDRAULAX TOUGH™ Hydraulic Hose (by the foot)
HT-16 | 1" HYDRAULAX TOUGH™ Hydraulic Hose (by the foot)
FJX-04-06 | 1/4" hose x 3/8" JIC 37° Female Swivel
FJX-06-06 | 3/8" Hose x 3/8" JIC 37° Female Swivel
FJX-08-08 | 1/2" Hose x 1/2" JIC 37° Female Swivel
FJX-10-10 | 5/8" Hose x 5/8" JIC 37° Female Swivel
FJX-12-12 | 3/4" Hose x 3/4" JIC 37° Female Swivel
FJX-16-16 | 1" Hose x 1" JIC 37° Female Swivel
FJX45-04-04 | 1/4" Hose x 1/4" JIC Female Swivel 45°
FJX45-06-06 | 3/8" Hose x 3/8" JIC Female Swivel 45°
FJX45-08-08 | 1/2" Hose x 1/2" JIC Female Swivel 45°
FJX45-10-10 | 5/8" Hose x 5/8" JIC Female Swivel 45°
FJX45-12-12 | 3/4" Hose x 3/4" JIC Female Swivel 45°
FJX45-16-16 | 1" Hose x 1" JIC Female Swivel 45°
FJX90-04-04 | 1/4" Hose x 1/4" JIC Female Swivel 90°
FJX90-06-06 | 3/8" Hose x 3/8" JIC Female Swivel 90°
FJX90-08-08 | 1/2" Hose x 1/2" JIC Female Swivel 90°
FJX90-10-10 | 5/8" Hose x 5/8" JIC Female Swivel 90°
FJX90-12-12 | 3/4" Hose x 3/4" JIC Female Swivel 90°
FJX90-16-16 | 1" Hose x 1" JIC Female Swivel 90°
Originally named for the now-defunct Joint Industrial Commission (JIC), this connection is very common in fluid power systems. Both the male and female halves of this connection have 37° seats. The seal takes place by establishing a line of contact between the male flare and the female cone seat. The threads hold the connection mechanically.
See the JIC Thread Chart Below
