R7-02BK-ASB | 1/8" SAE 100R7 Black Thermoplastic Hose Assembly
R7-02BK-ASB | 1/8" SAE 100R7 Black Thermoplastic Hose Assembly
Processing...
Code: R7-02BK-ASB

R7-02BK-ASB | 1/8" SAE 100R7 Black Thermoplastic Hose Assembly


Not looking for a custom made hose assembly? This product is also sold by the foot.

Pressure Rating: 2,500 PSI

Cost Per Foot:$1.90

Assembly Fee: $10.00

Choose Your Options

Hose Fittings

+ $0.00

Attention – it is not recommended to use these angled fittings together. We highly recommend using a Straight Fitting on one end, with an adapter to make the desired installation, and the angled fitting on the other end. This is to make installation of the hose easier.

Orientation

Please select how these fittings should be orientated to each other

Please select how these fittings should be orientated to each other.

Select Orientation

Overall Length (includes fittings)

+ $0.00

Value must be between 6 – 1200

Hose Assembly Length Information

Hose Assembly Length Information

Would you like hose protection?

+ $0.00

Installation Fee: $1/foot

Hose Protection Information

Hose Protection Information

Would you like a hose label attached?

+ $0.00

Please select a Hose Label option.

Hose Label

Hose Label

Reference / Hose Name Text (Optional):
If blank, our standard label will be attached.
Limited to 30 characters.

+ $0.00

I only want one end of the hose crimped, the other end will be open.

+ $0.00

Total:$10.00

Whoops

You are trying to purchase a hose assembly without any fittings...are you just looking for bulk hose? if so, click here to order.

X

DIY Hose Protection Options

Would you like to add a Hose Protection separately?





Whoops

You must enter a length in the Inches field.

Are you sure you only want one fitting crimped on?

Product Description
Technical Specifications
Extended Information
Product Interchange
Product Warnings
Conversion Chart
This product is a fully-assembled 1/8" Black Thermoplastic Hose.
We will crimp the fittings selected above onto the hose, using the length entered as Overall Length. 
Overall length is the distance in feet and inches from the end of fitting 1, to the end of fitting 2.
Please ensure you provide us with the correct Overall Length to ensure your hose is created correctly.

Looking for just cut R7-02BK hose without fittings installed?  Click here!

Looking for full reels of R7-02BK? Click here!

1/8" SAE 100R7 Thermoplastic Hose is recommended for medium pressure hydraulic lines, lubrication, medium pressure gas, and solvent. These lines are commonly found in bucket lifts, forklifts and other applications where a steel braided hose is not desired.
Maximum working pressure: 2,500 psi

Interchanges with Aeroquip FC372-02, Gates 2C7S. Parker 540N-2, Synflex 3130-02, and Weatherhead H43602


Product
Number
Inside
Diameter
Outside
Diameter
Maximum
Working Pressure
Minimum
Burst Pressure
Minimum
Bend Radius
R7-02BK 1/8" 0.32" 2,500 psi 10,000 psi 1/2"
R7-03BK 3/16" 0.41" 3,000 psi 12,000 psi 3/4"
R7-04BK 1/4" 0.49" 2,750 psi 11,000 psi 1-1/4"
R7-05BK 5/16" 0.56" 2,500 psi 10,000 psi 1-3/4"
R7-06BK 3/8" 0.62" 2,250 psi 9,000 psi 2"
R7-08BK 1/2" 0.76" 2,000 psi 8,000 psi 3"

Inner tube: Synthetic oil-resistant thermoplastic core
Reinforcement: High tensile synthetic fiber reinforcement
Outer cover: Abrasion-resistant polyurethane cover.
Temp. range: -40°F to +200°F


Important Information When Ordering A Custom Made Hose Assembly


How To Measure Your Custom Hose Assembly
Chart to Measure Hydraulic Hose Assembly

Understanding Orientation Options

When you are assembling a hydraulic hose, you have a choice of end fittings that could be straight, 45°, 90° and other combinations. When you choose two angled fittings, such as a 90° and a 45° fitting, we need to know how they should be installed so you can put the hose back on your equipment. Use this chart below to provide us the accurate orientation. Please call our office before ordering if you are unsure of your hose orientation options!

Hose Assembly Orientation Chart

Understanding "Swivel" Fittings
Understanding Swivel Fittings

When you see the word "Swivel" in a hose fitting descritpion, this means that the end nut will swivel for installation purposes only . This swivel will not rotate once the fitting is properly installed in the mating connector. If you need a swivel that will function under pressure, please look into our Full-Time Swivel Joints .


Interchanges with Aeroquip FC372-02, Gates 2C7S. Parker 540N-2, Synflex 3130-02, and Weatherhead H43602

WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

Length Converter

Type a value in the Feet field to convert the value to Inches:

Inches: