R17-06

Thumbnail Filmstrip of R17-06 | 3/8" SAE 100R17 Hydraulic Hose (by the foot) Images

    R17-06 | 3/8" SAE 100R17 Hydraulic Hose (by the foot)
    graphics/00000001/3/R17.png
    Purchase R17-06 | 3/8" SAE 100R17 Hydraulic Hose (by the foot)

    PART #: R17-06
    R17-06 | 3/8" SAE 100R17 Hydraulic Hose (by the foot)

    Please login to see inventory.


    $3.36


    R17-06 is 3/8 inch SAE 100R17 hydraulic hose sold by the foot for compact routing and custom hose fabrication. It maintains a constant working pressure and is recommended for petroleum and water based hydraulic fluids or general industrial service.

    • Maximum working pressure: 3,000 psi
    • Compatible fittings: Braided Hose Fittings for standard crimping, W Series bite to the wire fittings, and Parker compatible 43 Series fittings
    • Interchanges with: Aeroquip FC639-06, Gates 6M3K, Parker 451-6, and Weatherhead H14506

    Enter the footage required to receive one continuous length for the job.



    Product
    Number
    Inside
    Diameter
    Outside
    Diameter
    Maximum
    Working Pressure
    Minimum
    Burst Pressure
    Minimum
    Bend Radius
    R17-04 1/4" 0.50" 3,000 PSI 12,000 PSI 2"
    R17-06 3/8" 0.66" 3,000 PSI 12,000 PSI 2.5"
    R17-08 1/2" 0.80" 3,000 PSI 12,000 PSI 3.5"
    R17-10 5/8" 1.00" 3,000 PSI 12,000 PSI 4"
    R17-12 3/4" 1.12" 3,000 PSI 12,000 PSI 4.75"
    R17-16 1" 1.48" 3,000 PSI 12,000 PSI 6"


    Hose Features
    Inner Tube Material Oil-resistant Synthetic Rubber
    Reinforcement 1-Wire Braid ( Size 8 and below.)  2-Wire braid of high tensile steel wire. (Size 10 and above.)
    Cover Protection Oil and Abrasion-Resistant synthetic rubber
    Temperature Rating -40°F to 212°F
    Specialty 3000 Psi Constant & Half Bend Radius of SAE100R2