R2-20-ASB | 1-1/4" SAE 100R2AT Hydraulic Hose Assembly
Processing...
Code: R2-20-ASB

R2-20-ASB | 1-1/4" SAE 100R2AT Hydraulic Hose Assembly


Not looking for a custom made hose assembly? This product is also sold by the foot.

Pressure Rating:   1,815 PSI

Cost Per Foot:$13.13

Assembly Fee: $15.00

Choose Your Options

Hose Fittings

+ $0.00

Attention – it is not recommended to use these angled fittings together. We highly recommend using a Straight Fitting on one end, with an adapter to make the desired installation, and the angled fitting on the other end. This is to make installation of the hose easier.

Orientation

Please select how these fittings should be orientated to each other

Please select how these fittings should be orientated to each other.

Select Orientation

Overall Length (includes fittings)

+ $0.00

Value must be between 6 – 1200

Hose Assembly Length Information

Hose Assembly Length Information

Would you like hose protection?

+ $0.00

Installation Fee: $1/foot

Hose Protection Information

Hose Protection Information

Would you like a hose label attached?

+ $0.00

Please select a Hose Label option.

Hose Label

Hose Label

Reference / Hose Name Text (Optional):
If blank, our standard label will be attached.
Limited to 30 characters.

+ $0.00

I only want one end of the hose crimped, the other end will be open.

+ $0.00

Total:$15.00

Whoops

You are trying to purchase a hose assembly without any fittings...are you just looking for bulk hose? if so, click here to order.

X

DIY Hose Protection Options

Would you like to add a Hose Protection separately?





Whoops

You must enter a length in the Inches field.

Are you sure you only want one fitting crimped on?

Product Description
Technical Specifications
Product Interchange
Product Warnings
Conversion Chart
1-1/4" SAE 100R2AT Hydraulic Hose is recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Maximum working pressure: 1,815 psi

Interchanges with Aeroquip FC212-06, Gates 6G2, Parker 301-6, and Weatherhead H42506

Use this product with the following hose fittings:

Braided Hose Fittings

Standard crimp
Interchanges with
Weatherhead U Series


W Series Hose Fittings

Bite-to-the-wire peformance

43 Series Hose Fittings

Parker-Compatible 43 Series Fittings

Field-Attachable Hose Fittings

SAE 100R2AT hose only


SAE 100R2AT Hydraulic Hose Specifications
Product
Number
Inside
Diameter
Outside
Diameter
Maximum
Working Pressure
Minimum
Burst Pressure
Minimum
Bend Radius
R2-04 1/4" 0.59" 5,800 psi 23,200 psi 4"
R2-06 3/8" 0.75" 4,785 psi 19,140 psi 5"
R2-08 1/2" 0.88" 4,000 psi 16,000 psi 7"
R2-10 5/8" 0.98" 3,625 psi 14,500 psi 8"
R2-12 3/4" 1.16" 3,120 psi 12,480 psi 9.5"
R2-16 1" 1.50" 2,395 psi 9,580 psi 12"
R2-20 1-1/4" 1.87" 1,815 psi 7,260 psi 16.5"
R2-24 1-1/2" 2.17" 1,305 psi 5,220 psi 20"
R2-32 2" 2.66" 1,160 psi 4,640 psi 25"

Inner tube: Oil-resistant synthetic rubber
Reinforcement: Two braids of high-tensile steel wire
Outer cover: Oil and abrasion-resistant synthetic rubber
Temp. range: -40°F to +212°F
Interchanges with Aeroquip FC212-20, Gates 20G2, Parker 301-20, and Weatherhead H42520

WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

Length Converter

Type a value in the Feet field to convert the value to Inches:

Inches: