R4-24-ASB | 1-1/2" SAE 100R4 Suction Hose Assembly
Code: R4-24-ASB

R4-24-ASB | 1-1/2" SAE 100R4 Suction Hose Assembly

Not looking for a custom made hose assembly? This product is also sold by the foot.

Pressure Rating: 150 PSI

Cost Per Foot:$9.60

Assembly Fee: $21.00

Choose Your Options

Hose Fittings

+ $0.00

Attention – it is not recommended to use these angled fittings together. We highly recommend using a Straight Fitting on one end, with an adapter to make the desired installation, and the angled fitting on the other end. This is to make installation of the hose easier.


Please select how these fittings should be orientated to each other

Please select how these fittings should be orientated to each other.

Select Orientation

Overall Length (includes fittings)

+ $0.00

Value must be between 6 – 1200

Hose Assembly Length Information

Hose Assembly Length Information

Would you like hose protection?

+ $0.00

Installation Fee: $1/foot

Hose Protection Information

Hose Protection Information

Would you like a hose label attached?

+ $0.00

Please select a Hose Label option.

Hose Label

Hose Label

Reference / Hose Name Text (Optional):
If blank, our standard label will be attached.
Limited to 30 characters.

+ $0.00

I only want one end of the hose crimped, the other end will be open.

+ $0.00



You are trying to purchase a hose assembly without any fittings...are you just looking for bulk hose? if so, click here to order.


DIY Hose Protection Options

Would you like to add a Hose Protection separately?


You must enter a length in the Inches field.

Are you sure you only want one fitting crimped on?

Product Description
Technical Specifications
Product Interchange
Product Warnings
Conversion Chart
1-1/2" SAE 100R4 Suction and Return Hose is recommended for low pressure or vacuum lines in hydraulic system service with petroleum and water-base fluids.

Interchanges with Aeroquip FC318-24, Gates 24G4, Parker 881-24, and Weatherhead H03924

Use this product with the following hose fittings:

W Series Hose Fittings

Bite-to-the-wire peformance
SAE 100R4 Suction and Return Hose Specifications
Working Pressure
Rated Suction Minimum
Burst Pressure
Bend Radius
R4-12 3/4" 1.18" 300 psi 25"/hg 1,200 psi 5"
R4-16 1" 1.43" 250 psi 25"/hg 1,000 psi 6"
R4-20 1-1/4" 1.74" 200 psi 25"/hg 800 psi 8"
R4-24 1-1/2" 1.95" 150 psi 25"/hg 600 psi 10"
R4-32 2" 2.42" 100 psi 25"/hg 400 psi 12"

Inner tube: Oil-resistant synthetic rubber
Reinforcement: One helical wire between two braids of textile reinforcement
Outer cover: Oil and abrasion-resistant synthetic rubber
Temp. range: -40°F to +212°F
Interchanges with Aeroquip FC318-32, Gates 32G4, Parker 881-32, and Weatherhead H03932

WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

Length Converter

Type a value in the Feet field to convert the value to Inches: