Secure Checkout
R4-12-ASB | 3/4" SAE 100R4 Suction Hose Assembly graphics/00000001/R4-12-1.jpg
    R4-12-ASB | 3/4" SAE 100R4 Suction Hose Assembly
    Purchase R4-12-ASB | 3/4" SAE 100R4 Suction Hose Assembly

    SKU: R4-12-ASB
    R4-12-ASB | 3/4" SAE 100R4 Suction Hose Assembly

    Not looking for a custom made hose assembly? This product is also sold by the foot.

    Pressure Rating: 300 psi

    Cost Per Foot:$6.96

    Assembly Fee: $10.50

    Choose Your Options

    Hose Fittings

    + $0.00

    Attention – it is not recommended to use these angled fittings together. We highly recommend using a Straight Fitting on one end, with an adapter to make the desired installation, and the angled fitting on the other end. This is to make installation of the hose easier.

    Orientation

    Please select how these fittings should be orientated to each other

    Please select how these fittings should be orientated to each other.

    Select Orientation

    Overall Length (includes fittings)

    + $0.00

    Value must be between 6 – 1200

    Hose Assembly Length Information

    Hose Assembly Length Information

    Would you like hose protection?

    + $0.00

    Installation Fee: $1/foot

    Hose Protection Information

    Hose Protection Information

    Would you like a hose label attached?

    + $0.00

    Please select a Hose Label option.

    Hose Label

    Hose Label

    Reference / Hose Name Text (Optional):
    If blank, our standard label will be attached.
    Limited to 30 characters.

    + $0.00

    I only want one end of the hose crimped, the other end will be open.

    + $0.00

    Please Confirm:

    Whoops

    You are trying to purchase a hose assembly without any fittings...are you just looking for bulk hose? if so, click here to order.

    X

    DIY Hose Protection Options

    Would you like to add a Hose Protection separately?





    Whoops

    You must enter a length in the Inches field.

    Are you sure you only want one fitting crimped on?



    Length Converter

    Type a value in the Feet field to convert the value to Inches:

    Inches:

    Total:$10.50


    R4 hose is recommended for petroleum and water-bases hydraulic fluids in low pressure and vacuum service. R4 Suction Hose features a Helix wire between the braids resists collapse under vacuum or bending. This hose is suitable for hydraulic fluids on miner3/4" SAE 100R4 Suction and Return Hose is recommended for low pressure or vacuum lines in hydraulic system service with petroleum and water-base fluids.

    Interchanges with Aeroquip FC318-12, Gates 12G4, Parker 881-12, and Weatherhead H03912

    Use this product with the following hose fittings:

    Braided Hose Fittings

    Standard crimp
    Interchanges with
    Weatherhead U Series


    W Series Hose Fittings

    Bite-to-the-wire peformance
    al oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

    Not suitable for hydraulic fluids on phosphate ester basis (HFD).

    Use this hose with:

    Steel Multibarb Hose Ends

    - or -

    Beaded Hose Barbs